Fluke Networks LIQ-100 LinkIQ Cable + Network Tester
Fluke Networks LIQ-100 LinkIQ Tester verifies cable performance up to 10 Gb/s and troubleshoots network issues.
Available on Request
Fluke Networks LinkIQ Cable + Network Tester – Intelligent PoE and Network Troubleshooting Tool
The Fluke Networks LinkIQ™ Cable + Network Tester is a professional-grade troubleshooting solution for network installers, system integrators, and IT administrators. It verifies cable performance while diagnosing network switch connectivity, PoE power delivery, port capability, and link speed. This single handheld tester helps engineers validate wired networks quickly and accurately, reducing deployment time and field errors.
Reliable Cable Testing with Accurate Measurement
The LinkIQ uses frequency-based measurement to determine cable length and performance. The tester supports twisted-pair copper, structured cabling, and Ethernet installations up to 10 Gigabit links. It identifies wiring faults such as split pairs, opens, and shorts. Additionally, the remote ID accessory enables endpoint identification during larger installations.
Short sentences improve clarity. Tests are completed in seconds. Therefore, network technicians gain immediate insight without rework. The tool also documents test results for compliance reporting.
Switch Diagnostics and Network Visibility
The LinkIQ does more than cable testing. It also identifies the connected switch, VLAN configuration, advertised data rate, and duplex mode. This helps administrators confirm network services without logging into the switch CLI. Engineers can instantly validate port configuration on unmanaged and managed switches.
The tester displays LLDP/CDP information. It shows port ID, switch name, and management details. Therefore, field teams can troubleshoot edge connectivity faster and prevent configuration drift.
Intelligent PoE Validation
The LinkIQ validates PoE capability, including the power class delivered by the switch or injector. This allows installers to verify if a PoE-powered device such as an access point, VoIP phone, or camera can be supported on a given run. The tester measures actual power pairs in use, not just advertised values.
This prevents installation failure in PoE-powered networks. As a result, smart building deployments become smoother and more reliable.
Simple Documentation and Reporting
Technicians can save test results and export documentation using the LinkWare™ PC software. Reports are easy to share with customers or management. This speeds up project sign-off and helps maintain service quality. Clear documentation also reduces support requests after handover.
Designed for Professionals
The device features a rugged design for field use. It offers intuitive navigation with a touchscreen interface. No complex training is required. It supports multiple cable types and structured cabling environments, making it ideal for enterprise networks, MSP deployments, and new installations.
Conclusion
The Fluke Networks LinkIQ™ Cable + Network Tester is an all-in-one verification tool for modern Ethernet infrastructure. It helps validate cable performance, confirm switch configuration, and verify PoE levels during installation or maintenance. Its intuitive interface and accurate diagnostics make it ideal for structured cabling professionals, IT departments, MSPs, and network field engineers who require reliable results fast.
Download Fluke LinkIQ Cable+Network Tester Datasheet (PDF)
Contact KYS Infotech
Technical Specification Summary
-
Cable Testing: Supports 10BASE-T to 10GBASE-T (10 Mb/s to 10 Gb/s), measures lengths up to 305 m (1000 ft), detects opens, shorts, miswires, and split pairs.
-
Network Diagnostics: IPv4/v6 ping, nearest switch diagnostics (LLDP, CDP, FLP), identifies switch name, IP/MAC address, port, VLAN, and advertised data rates.
-
PoE Verification: Ethernet Alliance-certified for IEEE 802.3at/af/bt, measures power class (0-8), loaded voltage, and power for single/dual signatures.
-
Wi-Fi Testing (Duo Model): Analyzes 2.4 GHz, 5 GHz, 6 GHz bands, displays networks, channels, access points, and flags configuration errors.
-
Additional Features: Analog/digital toning, port blinking, remote ID locators, USB-C for data export/updates/charging, 800×480 color touch display.
-
Battery: 3.6 V, 6400 mAh Li-ion, 8-hour life, 4.5-hour charge time.
-
Physical: 22 cm x 11 cm, 624 g, operates 0°C to 45°C, 1 m drop resistance.
-
Languages: Supports 20 languages, including English, German, French, Japanese, and more.
https://dam-assets.fluke.com/s3fs-public/2024-11/LinkIQ%E2%84%A2_Cable_Wi_Fi_Network_Tester-en-us.pdf?VersionId=lBxICNvLPcZTGKNXoQ.5SmQk8vNTpydI
Related products
-
-
-
Hardware, Network Switch
HPE JL815A Aruba Instant On 1830 48G PoE Switch
The HPE JL815A Aruba Instant On 1830 48G Switch offers small businesses a secure, affordable networking solution. With 48 Gigabit Ethernet ports, including 24 Class 4 PoE ports (370W budget), it powers devices like IP phones and cameras.
SKU: JL815A -
Hardware, Wireless Access Point
HPE Aruba Instant On AP25 Wi-Fi 6 Access Point for Small Businesses | S0G24A | KYS Infotech
Hardware, Wireless Access PointHPE Aruba Instant On AP25 Wi-Fi 6 Access Point for Small Businesses | S0G24A | KYS Infotech
The HPE Aruba Instant On AP25 4×4 Wi-Fi 6 RW1 (S0G24A) delivers up to 5.3 Gbps for high-density SMBs. With Smart Mesh, 2.5 GbE uplink, WPA3 security, and app-based management, it supports 100+ devices with easy setup and a mounting kit included.
SKU: S0G24A
