Fluke 114, 115, 116 and 117 Digital Multimeters

Technical Specifications

• Models: Fluke 114, 115, 116, 117

• General Specifications:

  • Maximum Voltage: 600 V RMS (between any terminal and earth ground)
  • Safety: IEC 61010-1, Pollution Degree 2; IEC 61010-2-033 CAT III 600 V, 10 A; EMC IEC 61326-1: Portable
  • Fuse (115, 117 only): 11 A, 1000 V, IR 17 kA (Fluke PN 803293)
  • Display: 6,000 counts, updates 4/sec; 33-segment bar graph, updates 32/sec
  • Temperature:
    • Operating: -10°C to +50°C
    • Storage: -40°C to +60°C
  • Humidity: 0% to 90% (to 35°C); 75% (to 40°C); 45% (to 50°C)
  • Temperature Coefficient: 0.1 × specified accuracy/°C (<18°C or >28°C)
  • Operating Altitude: 2,000 meters
  • Battery: 9V Alkaline (IEC 6LR61), 400 hours typical without backlight
  • Certifications: CE, CSA, RCM
  • IP Rating: IP42 (dust and water protection)

• Accuracy Specifications (1 year after calibration, 18°C to 28°C, 0% to 90% RH):

   

  Function	Range	Resolution	Accuracy ± ([% Reading] + [Counts])	Models
  DC Millivolts	600.0 mV	0.1 mV	0.5% + 2	114, 115, 116, 117
  DC Volts	6.000 V / 60.00 V / 600.0 V	0.001 V / 0.01 V / 0.1 V	0.5% + 2	114, 115, 116, 117
  Auto-V LoZ True-RMS	600.0 V	0.1 V	2.0% + 3	114, 116, 117
  AC Millivolts True-RMS¹	600.0 mV	0.1 mV	1.0% + 3	114, 115, 116, 117
  AC Volts True-RMS¹	6.000 V / 60.00 V / 600.0 V	0.001 V / 0.01 V / 0.1 V	1.0% + 3	114, 115, 116, 117
  Continuity	600 Ω	1 Ω	Beeper: On < 20 Ω, Off > 250 Ω; detects opens/shorts ≥900 µs	115, 116, 117
  Ohms	600.0 Ω / 6.000 kΩ / 60.00 kΩ / 600.0 kΩ / 6.000 MΩ / 40.00 MΩ	0.1 Ω / 0.001 kΩ / 0.01 kΩ / 0.1 kΩ / 0.001 MΩ / 0.01 MΩ	0.9% + 2 (600 Ω); 0.9% + 1 (kΩ/MΩ); 5% + 2 (40 MΩ)	114, 115, 116, 117
  Diode Test	2.000 V	0.001 V	0.9% + 2	115, 116, 117
  Capacitance	1000 nF / 10.00 µF / 100.0 µF / 9999 µF	1 nF / 0.01 µF / 0.1 µF / 1 µF	1.9% + 2; >1000 µF: 5% + 20	115, 116, 117
  LoZ Capacitance (Power-Up)	1 nF to 500 µF	–	10% + 2 typical	115, 116, 117
  Temperature (K-Type, 116 only)	-40°C to 400°C / -40°F to 752°F	0.1°C / 0.2°F	1% + 18²	116
  AC Amps True-RMS¹ (45 Hz–500 Hz)	6.000 A / 10.00 A (20 A overload, 30 sec max)	0.001 A / 0.01 A	1.5% + 3	115, 117
  AC µAmps True-RMS¹ (45 Hz–1 kHz, 116 only)	600.0 µA	0.1 µA	1.5% + 3 (2.5% + 3 >500 Hz)	116
  DC Amps	6.000 A / 10.00 A (20 A overload, 30 sec max)	0.001 A / 0.01 A	1.0% + 3	115, 117
  DC µAmps (116 only)	600.0 µA	0.1 µA	1.0% + 2	116
  Hz (V or A Input, 115, 117 only; V Input, 116)	99.99 Hz / 999.9 Hz / 9.999 kHz / 50.00 kHz	0.01 Hz / 0.1 Hz / 0.001 kHz / 0.01 kHz	0.1% + 2	115, 116, 117

  ¹ AC ranges (except Auto-V LoZ) specified from 1% to 100% of range; Auto-V LoZ from 0.0 V. Inputs <1% unspecified. ² Temperature accuracy excludes probe error; 18 counts = 1.8°C.

  • Additional Features:
    • Fluke 114: Auto-V LoZ for ghost voltage detection; basic voltage and resistance measurements.
    • Fluke 115: Adds current (10 A), capacitance, frequency, continuity, and diode testing; autoranging.
    • Fluke 116: HVAC-specific with temperature (K-type thermocouple) and microamp (600 µA) measurements for flame sensors.
    • Fluke 117: Electrician-focused with non-contact VoltAlert™, Auto-V AC/DC selection, LoZ mode, and Min/Max/Average readings.

• Physical Specifications:

  • Dimensions: 167 x 84 x 46 mm (all models, approximate)
  • Weight: ~550 g (with battery, approximate)

• Environmental:

  • Operating Temperature: -10°C to +50°C
  • Storage Temperature: -40°C to +60°C
  • Humidity: 0% to 90% (to 35°C); 75% (to 40°C); 45% (to 50°C)
  • Altitude: 2,000 meters
  • IP Rating: IP42